BOW Products XTP XTENDER PRO Fences

BOW Products XTP XTENDER PRO Fences are specially designed to be an add-on to the popular Biesemeyer style fences. The XTP XTENDER PRO Fence attaches to the top of the fence and adds 2" of height to the existing fence. Three T-slots run the length of the XTP Fence that enables the use of accessories including featherboards, stops, etc.  The extra height adds stability and convenience to tall panel work.

These fences are designed to be a more permanent solution than the XT XTENDER Fences since they mount to your existing fence via hardware, not clamps. XTP PRO Fences utilize the same lower face of the existing fence for those who prefer not to have an aluminum fence near the blade.

Includes installation hardware.

Note: It's important you check the fit dimensions of the XTP Fence to your existing fence. Refer to the diagrams (second and third images).

• Ensure the XTP Fence mounting area fits within the saddle in the center top of your fence. The width is the distance between the inside of the two fence faces on either side of the steel tube. The length of the XTP Fence must also fit within the edges on top of the steel tube. The width of the XTP Fence mounting area is 2″. The length depends on the size XTP Fence you buy (35″ or 42″).
• The XTP Fence Face is designed with a gap sufficient to fit above your fence face height and width. This is to ensure the XTP fence will fit above the fence face and mount flush when installed.