Tried & True Danish Oil - Quart

A superior penetrating linseed oil finish that is polymerized for fast and easy application on interior woodwork and furniture. It is also ideal for wood paneling, cabinets, salad bowls, wood utensils, butcher blocks and surfaces that come in contact with food. Danish Oil Finish is commonly used by woodworking professionals for application to bare wood or overtop an already-stained piece. Danish Oil will darken the wood slightly and can be combined with oil-based pigments to create wood stains.

• 100% food contact safe
• 100% skin contact safe
• Zero VOC's
• Solvent-free
• No heavy metal driers

Coverage rate: Up to 250 square feet per quart

Care & Maintenance: Use a soft shammy cloth to polish any dull areas. Clean using Murphy’s Oil Soap or other wood safe cleaners.

To repair any scratches, nicks, or water marks: Use 0000 grade steel wool to buff out as much of the affected area as possible. Then, use a lint-free cloth to apply a small amount of the Varnish Oil to the damage wood. Follow the normal recommended application directions. For watermarks — if damage is severe, sand water mark away using fine grit sand paper until it is smooth and even with the surrounding surface. Reapply the Varnish Oil to the water mark by following the normal recommended application directions. Remember to always protect the wood surface using coasters or anti-scalding devices.

Don't forget your cloths/pads!