Festool RENOFIX RG 130 ECI Surface-Restoration Grinder

• Unbelievable power for convincingly high removal rate: The powerful EC-TEC motor of the RG 130 ECI enables a consistently high material removal capacity – for perfect substrate preparation in the shortest time
• Control dust as it happens: The RG 130 ECI Renovation Grinder, when combined with the CT 36 AC or CT 48 AC Mobile Dust Extractor and the CT-VA pre-separator, achieves excellent extraction results for virtually dust-free work
• Powerful and reliable thanks to the EC-TEC motor: The brushless EC-TEC motor is highly efficient, powerful, and lasts a long time – making overheating and forced shutdowns a thing of the past
• Always adapted to the working material: Whether you are working with concrete, paint, adhesive or other coatings: The DIA HARD, ABRASIVE, STONE, THERMO and PAINT diamond discs can handle it all. And any disc can be swapped out for another in just a few simple steps
• Sanding the floor right up to the edge: The flip-up brush segment enables old coatings and adhesive residue to be removed right up to the wall or edge. Thanks to the diamond disc, recessed by 0.5 mm, no damage occurs
• The right speed for every application: Depending on the material and requirement, the speed of the RG 130 ECI can be adjusted. The powerful EC-TEC motor thereby keeps the speed extremely constant even in the lower ranges
• Bluetooth® connection: With the Bluetooth® connection, the RG 130 ECI can establish a connection to the Dust Extractor. So extraction is also started automatically if the RG 130 ECI is inserted into another electricity source
• Efficient dust extraction: Uneven sub-surfaces may cause dust to escape between the brush ring and the material. To prevent this from happening, the spring-loaded brush ring adapts to the surface being sanded and helps to ensure excellent dust extraction
• Excellent guidance – precise removal: The guide table allows the surface-restoration grinder to be guided to a consistent and even depth. The removal depth can be adjusted so that you don’t remove any more material than required
• Adjustable auxiliary handle: The auxiliary handle with soft grip reduces vibrations and can be quickly adapted to different working conditions and comfort for both left and right-handed users. If required, the handle can also be folded back fully

Power consumption: 1,600 watt
Idle engine speed: 2,200 - 6.500 RPM
Tool holder: D25/M14
Tool dia.: 5-1/8" (130 mm)
Dust extraction connection dia.: 1-7/16" (36 mm)
Weight: 8.59 lbs. (3.9 kg)

• Front handle
• Flange set
• Key KF-AG
• Hook-and-loop fastener
• Systainer SYS3 L 237