Makita GT201M1D1 40V XGT Cordless 2-Piece Drill & Driver Combo Kit (2.5 Ah/4.0 Ah)

• Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of maximum torque
• Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
• Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop
• Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM) provides 1,860 in.lbs. of Max Torque
  Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
• XPT is engineered to provide increased dust and water resistance in harsh job site conditions
• The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
• The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
• XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
• XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
• 40V max XGT Lithium-Ion 2.5Ah Battery reaches a full charge in 28 minutes or less
• 40V max XGT Lithium-Ion 4.0Ah Battery reaches a full charge in 45 minutes or less
• The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
• The XGT Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
• The XGT Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
• 3-year limited warranty on tool, battery, and charger

Hammer Driver-Drill (GPH01Z)

Chuck size: 1/2"
Variable speed: 0 - 650 / 0 - 2,600 RPM
Blows per minute: 0 - 9,750 / 0 - 39,000 BPM
Max. torque: 1,250 in.lbs.
Wood capacity: 3"
Masonry/steel capacity: 13/16"
Overall length: 7-1/2"
Net weight (with battery): 6 lbs.

Impact Driver (GDT02Z)

Hex shank: 1/4"
Variable speed: 0 - 1,100 / 0 - 2,100 / 0 - 3,200 / 0 - 3,700 RPM
Impacts per minute: 0 - 1,400 / 0 - 2,600 / 0 - 3,600 / 0 - 4,100 IPM
Max. torque: 1,860 in.lbs.
Overall length: 4-3/4"
Net weight (with battery): 3.7 lbs.

• (1) 40V max XGT Brushless 1/2" Hammer Driver-Drill (GPH01Z)
• (1) 40V max XGT Brushless 4-Speed Impact Driver (GDT02Z)
• (1) 40V max XGT 2.5Ah Battery (BL4025)
• (1) 40V max XGT 4.0Ah Battery (BL4040)
• (1) 40V max XGT Rapid Optimum Charger (DC40RA)
• (1) Tool Bag