Osmo Polyx-Oil Raw - 2.5L

Price
$ 177.79

Have questions? Give us a call at 260-637-0054.

Osmo Polyx-Oil Raw is designed to retain an untreated appearance on light colored woods such as Oak, Ash, Birch, and Maple. It neutralizes the permanent "wet-look" that develops after the application of a clear oil-based finish and keeps the wood looking raw and untreated. Based on natural vegetable oils and waxes.

This finish is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil Raw is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister.

The advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush, roller, applicator pad, or lint-free cloth. Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.

Osmo Raw is also available in 0.125L and 0.75L. For a wet look, use Osmo Polyx-Oil Original Matte, Gloss, or Satin.

Check out Osmo Finish Applicators & Brushes here. Also, don't forget sandpaper!

Features
  • Easily applied with a brush, roller, buffing pad, or cloth
  • Can be spot-repaired and refreshed without sanding
  • Excellent water resistance. Suitable for kitchens, bathrooms, and other rooms exposed to high humidity
  • Microporous finish which does not crack, peel or flake
  • Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water
  • Saliva-resistant and sweatproof
  • Safe for humans, animals and plants and is suitable for children‘s toys
Specs

Coverage rate: Approx. 645 sq. ft. (258 sq. ft. per liter)
Number of coats: 2 coats
Application temp.: 41°F - 95°F (5°C - 35°C)
Approx. dry time: 8-10 hours

Directions
  1. Clean old microporous stains thoroughly. Completely remove old paints and lacquers.
  2. Sand wood surfaces carefully, beginning with coarse sandpaper. Final sanding work ranges from 120-150 grit for flooring, and 180-240 grit for furniture.
  3. Remove any dust with a vacuum or lint-free cloth.
  4. With a flat brush, applicator pad, microfiber roller, or lint-free cloth, work finish into wood thinly and evenly, in a figure 8 motion.
  5. Wait about 15 minutes, then remove excess product with a lint-free cloth along the grain.
  6. Allow 8-10 hours for drying time.
  7. Apply a second coat following the steps above.
Video

SKU: 10300044

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)