





OSMO Wood Wax Finish Clear Extra Thin - 0.75L
- Price
- $ 37.99
Have questions? Give us a call at 260-637-0054.
Osmo Wood Wax Finish Clear Extra Thin is a clear, satin wood finish designed for exotic and oily wood species, such as walnut, mahogany, cedar, etc. It combines all the advantages of oils and waxes in one unique product. These finishes are stain-resistant, water-repellent, and abrasion-resistant. Application is easy, as there is no need for a primer or sanding between coats, which saves time and money!
In comparison to conventional finishes, the use of vegetable ingredients in Osmo Finishes creates a more even color and harmonious appearance. This finish is suitable for the protection of wood in interior areas, such as wall and ceiling paneling, flooring, furniture, and toys. Due to its water-repelling qualities, Osmo Wood Wax Finish Clear Extra Thin is well suited to use in rooms that might get wet, like bathrooms and kitchens.
Wood Wax Finish Clear Extra Thin is also available in 0.125L and 2.5L.
Check out Osmo Finish Applicators & Brushes here. Also, don't forget sandpaper!
Features
- For exotic and oily wood species, and dark hardwoods
- Based on natural, rapidly renewable resources
- Microporous – won’t crack, peel, flake, or blister
- Breathable and moves with the wood
- Resistant against wine, beer, cola, tea, fruit juice, milk, and water
- No primer necessary
- Easy cleaning and maintenance – spot repairable
Specs
Size: 0.75L (750ml)
Approx. coverage: Approx. 193.5 sq. ft. (258 sq. ft. per liter)
Number of coats: 1-2 coats
Application temperature: 41°F - 95°F (5°C - 35°C)
Approx. dry time: 12 hours
Directions
- Clean or lightly sand old microporous finishes, remove old varnish.
- Sand carefully, beginning with coarse sandpaper. Recommended final sanding work for flooring is between 120-150 grit, and furniture is 220-240 grit.
- Remove dust with a vacuum, brush, or lint-free cloth.
- Stir Wood Wax Finish well before use.
- Apply thinly along the grain using a flat brush or lint-free cloth. Leave on for 30 minutes, then wipe away excess with a clean cloth.
- If a second coat is needed, follow the same process as #5.
- Surface is fully cured in 2-3 weeks.
Note: Recommended number of coats is 1 for furniture, 2 for flooring and worktops.