Oneway #3 Profiled Jaws for the Talon Chuck

Get the best grip with the Oneway #3 Spigot Jaws.

These spigot jaws made for the Oneway Talon Chuck are specially designed for turning large items. The serrations on the outside provide excellent grip while expansion chucking. This helps to ensure a safe work environment and keep your piece safely secured to the chuck.

For large bowls (over 12" in diameter and 5" deep), #3 jaws are an asset because their larger size will better support your material, whether holding inside or out. 

Why Oneway Jaws are Superior

Most jaws on the market are designed to only fit one diameter by a limited depth (design diameter). For example, a set of jaws turned to 2" diameter with a 7° taper * 1/4 deep will only work well in a cavity that is exactly 2" diameter * 7° and just less than 1/4" deep. They will hold progressively less, and increasingly damage your mounting as this base size changes from the theoretical perfect size.

Oneway jaws are designed to achieve excellent 8-point contact at all diameters in the jaw size range.Their patented profile top jaw shape increases gripping power at all diameters of round and square stock. Less wood damage also occurs with this jaw shape than with the conventional round-shaped jaws.

Important

• Not available for the Stronghold Chuck
• Not to be used with the woodworm screw

Weight: 1/2 lbs.
External Compression Min: 2-7/8”
External Compression Max: 4”
Internal Expansion Min: 3-3/8”
Internal Expansion Max: 4-5/8"